Filter
Top Products
14
Set up the printer and paper handling options
2 Have someone help you place the printer in the location you have chosen.
If you are installing the printer on an optional drawer or a duplex unit, align the
positioning posts on the option with the holes in the printer. Make sure the printer
is seated securely on the option.
3 Remove any tape or packing material from the outside of the printer.
4 If you purchased an output expander or mailbox, continue with this chapter.
Otherwise, skip to Step 5: “Set up the print supplies” on page 16.
Installing an output
expander
Your printer supports an optional output expander that lets you stack up to 650 sheets
of paper in one bin.
Note: After you unpack the output
expander, install it immediately.
Otherwise, the edges of the mounting
brackets could damage tabletops or
fabrics.
1 Unpack the output expander and remove any packing material.
2 Remove the printer top cover.
Warning: The output expander tray is
designed to hold the weight of print
material only. Do not use it as a shelf;
excess weight may cause it to disengage
from the output expander.
3 Align the mounting brackets on the bottom of the output expander with the slots
in the top of the printer.
4 Lower the output expander into place.