Filter
Top Products
17
Set up the print supplies
3 Remove the print cartridges. For each cartridge:
a Pull up on the handhold.
b Pull the cartridge straight out and use the handle to lift it off the guides.
c Set the cartridge on a firm, flat, clean surface in the upright position.
Warning: Do not touch the image
transfer unit belt with your fingers.
4 Remove the packing material from the image transfer unit belt:
a Grasp the detensioner located on the right side on the inside of the machine.
b Gently but firmly pull up on the detensioner and the attached sheet, then
remove both items from the printer.
5 Reinstall the print cartridges. For each cartridge:
a Turn the cartridge over so the handle is on the bottom.
b Remove the red plastic packing material from the photoconductor drum.
Discard the packing material.
b
a
c
1
2
1
Detensioner
a
b