Icom DS-100 Network Card User Manual


 
4
SET-UP
18
• Delete address ID
q Push [] to select ‘Delete address ID’, then push [ENT].
w Push []/[] several times to select a desired address ID
that you want to delete, then push [ENT].
• Address ID and name is dis-
played on the screen.
e Push [ENT] to delete the ad-
dress ID.
• Push [CLR] to exit the
screen.
r Push [CLR] to exit the menu.
• Add a group ID
q Push []/[] several times to
select ‘Add a group ID’, then
push [ENT].
w Push numeral keys to input
an address ID code, then
push [ENT].
• When a wrong number is input,
push [CLR], then correct the
number again.
e Enter the desired name for the ID code, then push [ENT].
• Push [A/a] several times to toggle capital letters, small letters and
numerals.
• Push the corresponding key one or more times to input the de-
sired character.
• Push [BS] to erase the character.
• Push [] to reverse the cursor position; [] or forward the cur-
sor position.
r Push [CLR] to exit the screen.
• Delete a group ID
q Push [] to select ‘Delete a group ID’, then push [ENT].
w Push []/[] several times to select a desired address ID
that you want to delete, then push [ENT].
• Address ID and name is displayed on the screen.
e Push [ENT] to delete the address ID.
• Push [CLR] to exit the screen.
r Push [CLR] to exit the menu.
<Add a group ID> a*
ID:(8digit)
0
Name:(15charactors)
<CLRExit / ENTOK>
<Delete address ID>
DS-100 SN10
DS-100 SN2
DS-100 SN3
DS-100 SN4
<CLRExit/ENTOK>
<Delete this ID>
ID:(9digit)
2673500100
Name:(15charactors)
DS-100 SN10
<CLRExit / ENTOK>