Filter
Top Products
6
Installing SNMP Management and Application Modules
To install a module:
1.
Remove the blank bracket (if present) covering the slot where the module will be
installed. IMC Networks recommends installing blank brackets in unused
module slots.
2.
Slide the module into the chassis using the card guides.
3.
Secure the module to the chassis by tightening the captive screw. (Refer to the
documentation shipped with the module for configuration information.)
4.
When installing modules observe ESD precautions, refer to the Electrostatic
Discharge Precautions section.
In order to manage an iMediaChassis series, the SNMP Management Module needs
to be installed in the appropriate slot of the chassis.
•
Install the iMediaChassis/20 SNMP Management Module into the first slot of the
chassis.
NOTE
This slot is ONLY for the Management Module; do not install Application Modules
such as media conversion and mode conversion modules in this slot.