Filter
Top Products
30
network list, and press Select/Enter.
4 Press Select/Enter to display on-screen keyboard, enter the password from
the on-screen keyboard, then press Menu to close the keyboard.
5 Highlight OK and press Select/Enter to wait for connecting successfully.
6 Select WLAN from the source list. Client Info page displays.
Web controlling the projector
Once you have the correct IP address for the projector and the projector is on or
in
standby mode, you can use any computer that is on the same local area network
to
control the projector.
• If you are using Microsoft Internet Explorer, make sure it is version 7.0 or
higher.
• The screenshots in this manual are for reference only, and may differ
depending on your browser.
1 Enter the IP address on the AP Info page in the address bar of your computer
browser and press Enter.
2 The main page of the Network Control displays.
i. To download EZ Display, click Download. See page 31 for details.
Client Info
AP 135
IP 192.168.43.81
PassCode
5124
i