Filter
Top Products
IN134UST/IN136UST User’s Manual
– 53 –
SIGNAL RESOLUTION
H-SYNC
(KHZ)
V-SYNC
(HZ)
COMPOSITE
S_VIDEO
COMPONENT
RGB
(ANALOG)
DVI/
HDMI
(DIGITAL)
1080P 56.3 50.0
－
○
－ ○
1080P 67.5 60.0
－
○
－ ○
O: Frequency supported
—: Frequency not supported
3D note：
“” means the timing can support non-3D and 3D signals with Frame Sequential and Top-
Bottom format.
“” means the timing can support non-3D and 3D signals with Frame Sequential format.
“” means the timing can support non-3D and 3D signals with Top-Bottom format.
Depending on the EDID files and display cards of the 3D source, it is possible the user will not be
able to choose any of the above 3D timings.
The projector's native resolution is 1280 x 800. If the resolution of the source is different than
1280 x 800, the projector may display uneven sized text and lines.
Signal types highlighted yellow can only be displayed in 4:3 mode.
Signal types highlighted in blue may display small amounts of noise. This is because the Video
Sync mode cannot adjust these signals automatically.
The DVD player monitors HDTV time. VG828 is secondary to the DVD player.
RB=Reduced Blacking