Filter
Top Products
11
Date/Time Settings
Click the [Apply] button to save the settings.
NOTE:
The new configuration settings are activated after restarting the network connection. The network connection must be
restarted when the configuration settings are changed, The network connection can be restarted using [Network
Restart] on the main menu.
• If you connect the projector to an existing network, consult a network administrator before setting server
addresses.
• To enable the SNTP function, the time difference must be set. SNTP servers report time in Greenwich mean time
(GMT)/Universal time; the time difference describes how many hours to add/subtract to get your local time.
• The projector will retrieve DATE and TIME information from the Timeserver and override time settings when
SNTP is enabled.
Item Description
Current Date Configures the current date in Year/Month/Day format.
Current Time Configures the current time in Hour:Minute:Second format.
Daylight Savings Time
Start-End
Month/week/day/hour/minute
Click the [ON] check box to enable daylight savings time and set the following items.
Configures the date and time daylight savings time begins/ends.
Configures the month daylight savings time begins (1~12)/the week of the month (First,
2,3,4,Last)/the day (Sun-Sat)/the hour (0-23)/minute (0-59)
Time difference Configures the time difference from GMT (hours:minutes). Set the same time difference as the
one set on your PC. If unsure, consult your network administrator.
SNTP
SNTP Server IP Address
Cycle
Click the [ON] check box to retrieve Date and Time information from the SNTP server and set
the following items.
Configures the SNTP server address in IP format. Consult with your network administrator to
get the IP address of your SNTP (time/date) server.
Configures the interval at which to retrieve Date and Time information from the SNTP server.
(hours:minutes).