InFocus IN5106 Projector User Manual


 
11
Adjusting the image
Adjust the height of the projector, if necessary, by pressing the release but-
tons on each side of the projector’s front to extend the elevator feet.
Position the projector the desired distance from the screen at a 90 degree
angle (perpendicular) to the screen.
See page 39 for a table listing screen sizes and distances.
Adjust the zoom or focus by rotating the Zoom or Focus rings inside the
lens door until the desired image size and focus are produced.
If the image is not on the screen or viewing area, adjust it by using the lens
shift dials inside the lens door.
Use the right dial to shift the lens left or right. Use the left dial to shift the
lens up or down.
Adjust the Contrast or Brightness in the Picture menu.
See page 27 for help with the menus.
adjust height
elevator
foot
elevator
foot
release
button
release
button
adjust distance
adjust zoom and focus
adjust lens shift
adjust Contrast or Brightness
contrast
brightness