InFocus IN5106 Projector User Manual


 
6
Connector Panel
The projector provides three computer and three video connection options:
one VESA computer
one HDMI™ (High Definition Multimedia Interface)*
one component BNC (G/Y, B/C
B
/P
B
, R/C
R
/P
R
, H, V)
one component RCA video (Pr, Pb, Y)
one S-video
one composite RCA video
The projector provides computer and video connectors for audio support:
two composite RCA stereo audio (L, R)
one audio out
two audio ins
The projector also provides the following connectors:
one wired remote
one monitor out
RS-232 serial connector (for serial control)
RJ-45 connector (for networked control)
The RS-232 Command Line Interface (CLI) specifications and commands
are available in the Appendix and on our website. See the back inside cover
of this User’s Guide for website information.
* HDMI is an industry standard, uncompressed, all-digital audio/video
interface that connects between sources, such as set-top boxes, DVD play-
ers, and receivers and your projector. To take advantage of HDMI 1.3 you
must have a 1.3-compatible source. The HDMI, because it is a digital signal,
yields the highest quality image. It is common for these signals to be
encrypted with HDCP (high-bandwidth digital-content protection). Your
new projector ships standard with decryption codes so you can enjoy these
high quality, all digital images.
lock
HDMI
monitor
s-video
composite
audio in 1,2
external
speakers
(audio out)
RJ-45
VESA computer
component video
video
RS232
serial control
audio in 3,4
remote
control
receiver
(IR)
speaker
power connector and switch
USB
BNC
wired remote