Filter
Top Products
User’s Manual
Lan Control Settings
Press the ENTER/SELECT button to enter the Lan Control Settings sub menu.
ITEM DESCRIPTION
Press the ◄► buttons to select projector remote command control.
(Range: RS232/ RJ45)
Control By
Note: thi
s setting changes the standby power:
RS232 <1W (Default)
RJ45 <9W
Network State
Press the ENTER/SELECT button to enter the Net
work State sub menu. See below.
Network State
ITEM DESCRIPTION
Network State Displays the network connection status.
Press ◄► to turn DHCP On or Off.
DHCP
Note: If you select DHCP Off, complete the IP Address, Subnet Mask, Gateway, and
DNS fields
.
Projector IP Ad-
dress
Enter a valid IP address if DHCP is turned off.
Subnet Mask Enter a valid Subnet Mask if DHCP is turned off.
Default Gateway Enter the default Gateway address on the network.
DNS Enter a valid DNS name if DHCP is turned off.
– 30 –
Apply Press (ENTER/SELECT) / ► to confirm settings.