Filter
Top Products
Inverting the Image
10
When you need to remove the projector or replace
the lamp or clean the air filter:
1
Disconnect all cables.
2
Hold the projector from underneath.
3
Remove the knurled knob that holds the pro-
jector to the mounting plate.
4
Slide the projector to release it from the quick
release bolts. The projector will come off of
the mounting plate. The mounting plate will
still be attached to the base box.
5
Replace the lamp or clean the air filter as
described in your
LP 740 User’s Guide
if
needed.
6
Realign the quick release bolts in the keyhole
slots on the mounting plate.
7
Fasten the knurled knob.
ADJUSTING THE IMAGE
Inverting the Image
1
Press the
Menu
button on the remote or key-
pad to display the projector’s on-screen
menu.
2
Using the arrow buttons, move the cursor to
the Custom Setup menu, then press
Enter
.
3
Move the cursor to the Image Mode menu
and press
Enter
. Move the cursor to Ceiling,
then select ON.