Filter
Top Products
31
Controls Menu
FIGURE 24
Controls menu
Video Standard
NOTE: If you already know the
video standard used in your geo-
graphical area, it’s often best to
manually select it.
When Video standard is set to Auto, the projector attempts to
pick the video standard (NTSC, NTSC 4.43, PAL, PAL-M, PAL-N,
or SECAM) automatically based on the input signal it receives.
(The video standard options may vary depending on your region
of the world.) The input signals for SECAM, PAL-M, and PAL-N
video cannot be automatically detected, therefore they must be
chosen manually. If the projector is unable to detect the correct
standard, the colors might not look right or the image might
appear “torn.” If this happens, manually select a standard by
clicking either mouse button and cycling through the standards.
Standby Time
This option lets you select how long the lamp stays on and the
blank screen is displayed when the projector enters standby
mode before the projector turns off. Select among 1, 5, 10, and 15
minutes and 1 and 2 hours by clicking either mouse button and
cycling through the options.