InFocus LP755 Projector User Manual


 
32
Using the Projector
Ceiling Projection
NOTE: To order the LP755
Ceiling Mount, refer to “Optional
Accessories” on page 52.
When you turn
Ceiling Projection
on, the projector turns the
image upside down for ceiling-mounted projection. Highlight
Ceiling Projection, then click either mouse button to select turn
this feature on and off.
Rear Projection
When you turn
Rear Projection
on, the projector reverses the
image so you can project from behind a translucent screen. High-
light Rear Projection, then click either mouse button to select turn
this feature on and off.
Default Source
Default Source toggles between Computer 1, Computer 2, and
Video. This determines which source the projector checks first for
active video during power-up. Highlight Default Source and
click either mouse button to toggle between the options.
Auto Source Select
This setting toggles between On and Off. When this feature is Off,
the projector defaults to the source selected in Default Source. To
display another source, you must manually select one by press-
ing the
comp
or
video
button on the keypad or remote. When this
feature is On, the projector automatically finds the active source,
checking the default source first. Highlight Auto Source Select
and click either mouse button to turn this feature on and off.
Plug and Play
This setting toggles between On and Off. When it is On, most
new computers will automatically recognize the LP755, then set
the monitor resolution and refresh rate accordingly. You need to
set the Plug and Play setting to Off for the LP755 to display prop-
erly on some older computers. The Plug and Play setting does not
affect video images. If the LP755 display constantly changes
between the computer image and the message, "Perfecting the
image", you may need to set Plug and Play to Off.