Filter
Top Products
8
Setting up the Projector
Connecting the CableWizard™II to the Projector
CAUTION: Turn off the
computer, monitor and projector
whenever you connect or
disconnect cables.
The CableWizard II (referred to as “CableWizard” in this manual
for brevity) simplifies the connection process by providing a cen-
tral hub for all the connections between the projector and your
computer. The connectors on the CableWizard are labeled with
icons.
Connect the end of the CableWizard cable to the
connector on the projector’s connector panel (Figure 5).
NOTE: The projectors are
optimized for use with
CableWizard II. If you have
CableWizards from other models
of In Focus projectors, we do not
recommend using them. Image
quality is reduced by using a
CableWizard other than
CableWizard II. The label on the
bottom reads CableWizard or
CableWizard II.
F
IGURE 5
Connecting the CableWizard to the projector
Selecting Connectors on the CableWizard
Turn the selector on the top of the CableWizard to reveal the
correct connectors for your computer.
NOTE: You must disconnect all
cables before turning the selector
on the CableWizard.
F
IGURE 6
Selecting connectors on the CableWizard