Filter
Top Products
32
OWNER'S MANUAL
Your the Monitorhas 3 automatic factory preset picture settings ("Standard", "Vivid" and "Mild"). You can choose
Standard, Vivid or Mild by pressing "Picture" key on the remote control (or by making a selection from the
menu). Or you can select User which automatically recalls your personalized picture settings.
Press Menu/set button to display the main OSD menu.
Select the picture main menu.
Press Menu/Set to enter the sub menu.
Select Mode and press Menu/Set to enter the sub
menu. Then the picture sub mode appear.
Select the picture mode and press Menu/Set button.
You will see the picture setting bars.
Just Press BACK button on the remote control.
You can adjust each values of the picture setting,
but the changed values are stored as in User mode.
1
2
3
4
5
6
Mode Standard
Temperature Normal
Video NR ON
Film Mode OFF
Screen Format Wide
• Alternative method : Just press the "Picture" button on the remote control. Each time it is pressed, different mode
is selected.
Standard
Vivid
Mild
User
Contrast
Brightness
Color
Sharpness
Recall
USER mode has additional settings
in a sub-menu: See next page.
Setting the Picture
Mode