Filter
Top Products
before you turn it on for the first time. Failure to do so may cause damage to the scanner, and
will void your warranty. Simply turn the dial on the bottom of the scanner to the unlock posi-
tion.
Turn on the scanner, then start-up your system.
Installing the drInstalling the dr
Installing the drInstalling the dr
Installing the dr
ii
ii
i
vv
vv
v
erer
erer
er
This scanner interfaces with your Mac software through a Plug-in driver. You can use this
scanner with any program that is Plug-in Module (PIM) compatible.
To install the Plug-in driver:
1 . Insert the Plug-in disk into the floppy drive.
2. Double-click the disk icon if it is not already open.
3. Double-click the English folder to open its contents.
4. Locate the plug-ins folder for the application (i.e. PhotoDeluxe)
you will be using to scan. Drag the plug-in module from the English folder on the disk to the
application’s plug-ins folder.
That application can now be opened and used with the scanner. The scanner plug-in should
display on the Acquire list in the File menu.
The ImageReader FB can also simulate an Apple scanner. This “Works Like Apple” driver is to
be used with OCR programs, like OmniPage and TypeReader, that do not support PIM. Simply
drag the “Works Like Apple” driver into your system folder and restart. When you are ready to
use the OCR program, configure it for Apple Scanner or AppleOne Scanner. You can now use
the scanner for OCR processes.
Installing the aInstalling the a
Installing the aInstalling the a
Installing the a
pplicapplica
pplicapplica
pplica
tion softwtion softw
tion softwtion softw
tion softw
arar
arar
ar
ee
ee
e
When the hardware and device driver software are installed, install the application software as
described in their respective manuals. The
Quick Start Guide
also contains information about
installing these programs.
2-4