Initio I/O HIGHWAY Network Card User Manual


 
28
initio
®
4 It is highly recommended that you verify Initios Windows 95 device driver by selecting
MY COMPUTER from the desktop. Then select CONTROL PANEL:
 Select SYSTEM from within the CONTROL PANEL group,
 Select DEVICE MANAGER from within the SYSTEM group,
 Select SCSI CONTROLLER from within the DEVICE MANAGER listing, and
 Select the Initio INI-9XXXU/UW PCI SCSI Host Adapter from within the SCSI
CONTROLLER listing. If This device is working properly is displayed on your
screen, the driver has been correctly installed.
This completes loading the Host Adapter Driver, follow the on-screen directions to com-
plete the Windows 95 installation. Exit and reboot the system to activate the device driver.
Adding the Initio Driver to an Existing Windows 95B
(OSR2) System
These instructions will guide you through the installation of the Initio host adapter to an
existing Windows 95 system. Windows 95 will automatically detect the presence of new
hardware in Plug and Play compliant systems. It is important that the Initio INI-9XXX
hardware has been properly installed before proceeding further.
1 Microsoft Windows 95 will detect the presence of new hardware upon boot-up and
will display a dialog window titled update Device driver wizard
2 Insert the INI-9XXXU/9XXXUW DRIVER DISK 1 into floppy drive,:
Select NEXT
Select the OTHER LOCATION
Type A:\Win95, then select OK
Select FINISH
At window Insert Disk labled INI-9XXXU/9XXXUW driver, select OK
At window titled Copying file, replace the highlighted directory path with
A:\Win95, then select OK this will complete loading the INI910U.MPD driver
onto your hard disk drive. Restart your computer.
3 It is highly recommended that you verify Initios Windows 95 device driver by selecting
MY COMPUTER from the desktop. Then select CONTROL PANEL:
Select SYSTEM from within the CONTROL PANEL group,
Select DEVICE MANAGER from within the SYSTEM group,
Select SCSI CONTROLLER from within the DEVICE MANAGER listing, and
Select the Initio INI-9XXXU/UW PCI SCSI Host Adapter entries from within the
SCSI CONTROLLER listing. If This device is working properly is displayed on
your screen, the driver has been correctly installed.
Microsoft Windows 95/95b (OSR2) Driver Installation