Filter
Top Products
11
NS-CLBT01-B/NS-CLBT01-W Digital Clock Radio with Bluetooth
www.insigniaproducts.com
3 Press or to manually select a radio frequency.
OR
Press and hold or to automatically tune to the next lower or
higher radio station.
4 Press or to increase or decrease the volume. While you are
adjusting the volume, the “Volume” icon lights and the current volume
level number appears in the middle of the LCD.
5 To turn off your radio, press and hold Source for two seconds.
OFF appears on the LCD for three seconds, then your radio turns off.
Programming a radio station preset
A radio station preset lets you assign a preset number to a radio station to
make it easier to tune to a station. You can program 10 presets.
To program a radio station preset:
1 Tune to the radio station you want to program, then press and hold
Preset for two seconds. The “Preset” icon lights and the next
available preset number (P-01 through P-10) appears in the middle of
the LCD. When you exit programming mode, these indicators
disappear.
2 If you want to use a different preset number, press or repeatedly
until the number you want appears on the LCD.
3 Within 10 seconds, press Preset again to save your station preset.
If you do not press Preset within 10 seconds, your radio exits
preset mode and your station preset is not saved.
Tuning to a preset radio station
After you program radio station presets, you can quickly tune to a preset
station.
To tune to a preset radio station:
• Quickly press and release Preset one or more times until the
“Preset” and preset number (P-01 through P-10) for the station you
want appears on the LCD. Your radio tunes to the station.
Adjusting the LCD brightness
When you adjust the LCD brightness, your radio retains the setting and
uses this setting the next time you turn on your radio.
To adjust the LCD brightness:
1 Quickly press (SNOOZER/DIMMER) repeatedly to select a
brightness level. You can select High, Middle, or Low.
SNOOZE / DIMMER