Filter
Top Products
GB2.book : GB203 14 Tue Oct 27 13:01:06 1998
C H A P T E R 3 Configure the module and connect the cables
14
3 Plug the other end of the Stacking Cable into an empty port on
the Matrix Module located on the same side of the switch (for
example, both modules in Slot A), and secure it using the
latches on the connector.
4 The Stack Interface Module in the other slot on this switch must
be plugged into the same port number in the other Matrix Mod-
ule (for example, both modules in slot B), and secured using the
latches on the connector.
5 Plug a second Stacking Cable into the 1000Base-SX/1000Base-
LX SIM connector on the 1000Base Module, and secure it
using the latches on the connector.
6 Plug the other end of the Stacking Cable into an empty port on
the Matrix Module located on the same side of the switch (both
modules in Slot A), and secure it using the latches on the con-
nector.
1000Base-SX
Stack Interface Module
CLASS 1 LASER PRODUCT
1000SX Module for 500 Series Switches
1718