Intel 1000SX Switch User Manual


 
GB2.book : legal 24 Tue Oct 27 13:01:06 1998
24
APPENDIX A Limited Hardware Warranty
Federal Communications Commission (FCC) Statement
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in
a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his
own expense.
The user is cautioned that changes and modifications made to the equipment without approval of the manufacturer could void the
user’s authority to operate this equipment.
Manufacturer Declaration
Intel declares that the Express 500 Series Switches comply with the EU Directive 89/336/EEC, using the EMC standards EN55022
and EN50082-1. These products also meet EU Directives 74/23/EEC and 93/68/ and are certified by DEMKO to be compliant with
EN 60950/A1/A2/A3 and by UL to be compliant with UL 1950 and CSA -C22.2 No. 950. These products have been tested and
verified to meet CISPR 22 Class A requirements and are registered with VCCI Class 1 products.
WARNING: Fiber-optic ports on 1000SX—Optical Safety
Never look directly at the fiber TX laser port and fiber cable ends when they are powered-up.
WARNING: Fiber-optic ports on 1000LX—Optical Safety
Never look directly at the fiber TX laser port and fiber cable ends when they are powered-up.
WARNING
This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be re-
quired to take adequate measures.
CLASS 1
LASER PRODUCT
CLASS 1
LASER PRODUCT
Peak Power 3mW, Time Base 100s
1261nm < λ < 1360nm
IEC 825–2:1993