Filter
Top Products
User’s Manual
ESM-2850 User’s Manual
59
3.5.5.5 Video Off Method
This determines the manner in which the monitor is blanked.
The choices: Blank Screen, V/H SYNC+Blank, DPMS.
3.5.5.6 Video Off In Suspend
This determines the manner in which the monitor is blanked.
The choice: No, Yes.
3.5.5.7 Suspend Type
This item will set the system status to shut down the PC.
The choices: Stop Grant, PwrOn Suspend.
3.5.5.8 MODEM Use IRQ
This determines the IRQ in which the MODEM can use.
The choices: NA, 3, 4, 5, 7, 9, 10, 11.
3.5.5.9 Suspend Mode
The item allows to set the number of minutes before the system enters suspend mode.
The choices: Disabled, 1, 2, 4, 8, 12, 20, 30, 40 Min, 1 Hour.
3.5.5.10 HDD Power Down
There are three selections for Power Management Option; both of them have fixed mode
settings.
The choices: Disabled, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 Min.
3.5.5.11 Soft-Off by PWR-BTTN
Pressing the power button for more than 4 seconds forces the system to enter the Soft-Off
state when the system has “hung”.(Only could working on ATX Power supply)
The choices: Delay 4 Sec, Instant-Off.
3.5.5.12 Wake Up by PCI/LAN
This will enable the system to wake up through PCI/LAN peripheral.
The choices: Enable, Disabled.
3.5.5.13 Power On By Ring
This determines whether the system boot up if there’s an incoming call from the Modem.
The choices: Enable, Disabled.
3.5.5.14 USB KB Wake-up From S3
This option is used to enabled/disabled USB keyboard wake up with suspend to RAM.
The choices: Enable, Disabled.
3.5.5.15 Resume By Alarm
This function is for setting date and time for your computer to boot up.
The choices: Enabled, Disabled.
3.5.5.16 Primary/Secondary IDE 0/1
This function is for setting IDE 0/1 on primary/secondary mode.
The choices: Enabled, Disabled.