Filter
Top Products
6-7
iRISM-186 COMMANDS
6
6.5.24 Start Up Commands (/ or \)
Upon reset, the board is in the echo mode. Until it receives an ASCII slash (/) or reverse-
slash (\), it increments every character it receives from the host and sends the incremented
value back to the host. It also displays the binary code of the character received on the
LEDs. If a reverse-slash is received by the RISM, the board leaves the echo mode and starts
normal operation. If a slash is received, it stops echoing incremented received data and
starts responding to RISM commands with the diagnostic flag set. (See the option “-DIAG”
on page 4-4 for additional information on the diagnostic mode.)