Filter
Top Products
56
4
Supported Softwares
enabled is System Temp. If the internal temperature of the system
is too high, only a warning message will pop-up.
Temperature Unit
You can select the temperature unit between Celsius and Fahrenheit.
The default unit is Celsius.
Polling Interval
This is used to set the interval for monitoring the system. The range
is from 1 sec. to 120 sec. The default interval is 2 sec.
4.3 Patch Utility for Windows
95
The CD included in the system board package contains a patch
utility. If you are running Windows
95 (Win95, Win95+, Win95
OSR1: Windows 95 OEM Service Release 1, Win95 OSR2: Windows
95 OEM Service Release 2.0 or Win95 OSR2.1: Windows 95 OEM
Service Release 2.0 plus USB Supplement), you need to run the
patch utility.
Insert the CD into a CD-ROM drive. The autorun screen (Main
Board Utility CD) will appear. Click Patch Utility for Windows 95.
Please refer to its readme file for instructions on installing the utility.
All steps or procedures to install the utility are subject to change
without notice as the utility may occassionally be updated. Please
refer to the readme file for the latest information.