Filter
Top Products
Chapter 2 Hardware Configuration
Page: 2-22
PCI-471LF USER
′
S MANUAL
2-31. RESET/NMI/CLEAR WATCHDOG SELECTION
JP2 : Reset/NMI/Clear Watchdog Selection
The selections are as follows:
FUNCTION
JUMPER SETTING
(pin closed)
JUMPER
ILLUSTRATION
RESET 1-2
JP2
NMI 3-4
JP2
CLEAR WATCHDOG 5-6
JP2
SMI 9-10
JP2
***Manufacturing Default is set as open.
User may select to use the Reset or NMI watchdog. NMI, also known as
Non-Maskable Interrupt, is used for serious conditions that demand the
processor’s immediate attention, it cannot be ignored by the system unless it
is shut off specifically. To clear NMI command, user should short the “Clear
Watchdog” pin via push button.