Filter
Top Products
Intel Desktop Board D102GGC2 Product Guide
34
Installing and Removing a PCI Express x16 Card
CAUTION
When installing a PCI Express x16 card on the desktop board, ensure that the card is fully seated
in the PCI Express x16 connector before you power on the system. If the card is not fully seated in
the PCI Express connector, an electrical short may result across the PCI Express connector pins.
Depending on the over-current protection of the power supply, certain board components and/or
traces may be damaged.
Installing a PCI Express x16 Card
1. Observe the precautions in "Before You Begin" on page 23.
2. Place the card in the PCI Express x16 connector and press down on the card until it is
completely seated in the connector (
Figure 15, A) and the card retention notch snaps into place
around the RM pin .
3. Secure the card’s metal bracket to the chassis back panel with a screw (
Figure 15, B).
OM19146
B
A
Figure 15. Installing a PCI Express x16 Card