Filter
Top Products
Installing and Replacing Desktop Board Components
45
Setting the BIOS Configuration Jumper
NOTE
Always turn off the power and unplug the power cord from the computer before changing the
jumper. Moving the jumper with the power on may result in unreliable computer operation.
Figure 24 shows the location of the desktop board’s BIOS configuration jumper block.
OM19154
1
3
2
BR1
Figure 24. Location of the BIOS Configuration Jumper Block
The three-pin BIOS jumper block enables all board configuration to be done in the BIOS Setup
program.
Table 9 shows the jumper settings for the Setup program modes.