Filter
Top Products
Intel Desktop Board D865PCD Technical Product Specification
94
4.5 Security Menu
To access this menu, select Security from the menu bar at the top of the screen.
Maintenance Main Advanced
Security
Power Boot Exit
The menu represented by Table 54 is for setting passwords and security features.
Table 54. Security Menu
If no password entered previously:
Feature Options Description
Supervisor Password No options Reports if there is a supervisor password set.
User Password No options Reports if there is a user password set.
Set Supervisor Password Password can be up to seven
alphanumeric characters.
(Note 1)
Specifies the supervisor password.
User Access Level
(Note 2)
• No Access
• View Only
• Limited
• Full (default)
Sets the user access rights to the BIOS Setup
Utility.
No Access prevents user access to the BIOS
Setup Utility.
View Only allows the user to view but not
change the BIOS Setup Utility fields.
Limited allows the user to changes some
fields.
Full allows the user to changes all fields
except the supervisor password.
Set User Password Password can be up to seven
alphanumeric characters.
(Note 1)
Specifies the user password.
Clear User Password
(Note 3)
• Ok (default)
• Cancel
Clears the user password.
Chassis Intrusion • Disabled (default)
• Log
• Log, notify once
• Log, notify until cleared
Disabled = Disables Chassis Intrusion
Log = Logs the intrusion in the event log
Log, notify once = Halts system during POST.
User must press <F4> to continue. Intrusion
flag is cleared and the event log is updated.
Log, notify til cleared = Halts system during
POST. User must enter BIOS setup Security
Menu and select “Clear Chassis Intrusion
Status” to clear the Chassis intrusion flag.
Notes:
1. Valid password characters are A-Z, a-z, and 0-9.
2. This feature is displayed only if a supervisor password has been set.
3. This feature is displayed only if a user password has been set.