Filter
Top Products
Installing and Replacing Desktop Board Components
35
Installing and Removing a Processor
Instructions on how to install the processor to the Desktop Board are given below.
Installing a Processor
CAUTION
Before installing or removing the processor, make sure the AC power has been
removed by unplugging the power cord from the computer; the standby power
indicator should not be lit (see Figure 4 on page 28). Failure to do so could damage
the process
or and the board.
To install a processor, follow these instructions:
1. Observe the precautions in "Before You Begin" on page 31.
2. Open the so
cket lever by pushing the lever down and away from the socket
(Figure 7, A and B).
Figure 7. Lift the Socket Lever