External connectors
System connectors
Internal connectors
GPIO
USB
COMs
IDE
FDC
LVDS
DVO
PC/104
PC/104-Plus
Features ePanel-mgx ePanel-C3
CPU
AMD Geode
®
SC1200 VIA
®
Eden ESP
CPU Clock
266 MHz 300 MHz, 733 MHz, 1 GHz
Chipset
integrated CLE266 / VT8235
DRAM
256 MByte SDRAM (max.) DDR RAM 1 GByte (max.)
DRAM socket
1x SO-DIMM, 144 pin 1x SO-DIMM, 200 pin
CompactFlash
True I DE Mode Primary Channel
Boot Drive
True I DE Mode Primary Channel
Boot Drive
Resolution
XGA (max.) UXGA (max.)
Video Input
Philips Videodecoder SAA7118 Philips Videodecoder SAA7118
Backlight Support
standard 7 pin connector 12 V/500
mA dimming control voltage 0-5 V
standard 7 pin connector 12 V/500
mA dimming control voltage 0-5 V
IDE Interface
1x EIDE (UDMA-33) 1x EIDE (UDMA-100)
Audio
AMD
®
AC97 VIA
®
VT1616 (AC97) Line in /out
USB
3x 1.0 3x 2.0
Ethernet
10/100Base-T 10/100Base-T VIA
®
VT6103
Graphics Controller
integrated VIA
®
CLE266 with integrated
VIA
®
AGP (4x) Castelrock
Graphics Memory
shared up to 4 MByte 16/32/64 MByte shared memory
MPEG2 HW decoder
-
Touch Controller
supports 4/8 wire resistive
technology
supports 4/ 5*/8 wire resistive
technology (5-wire optional)
Touch Matrix
8x8
PC CARD Adapter
Typ II
Mini-PCI
-
Supply Voltage
8 / 28 V
Battery Interface (SMB)
Smart battery charger onboard 3 A
max. charging current 18 V max
charging voltage power monitoring
by SMBus
Smart battery charger onboard 1 A
max. charging current 18 V max
charging voltage power monitoring
by SMBus
Flat Panel Interface
TTL / LVDS
Expansion
I/O Adapters (for standard
connectors as USB, Mouse etc.) a.
video in/TV out
I/O Adapters (for standard
connectors as USB, Mouse etc.) a.
video in/TV out (optional)
Common Features
Keyboard, Mouse, 1x EPP, single
Floppy Interface, Dark Boot, I2C,
Watchdog, PC Card Adapter Typ II
Keyboard, Mouse, 1x EPP, single
Floppy Interface, Dark Boot, I2C,
Watchdog, PC Card Adapter Typ II,
Mini-PCI
Cooling
- passive / active (depends on
system design)
Power Consumption (typ.)
7 W/12 V estim. 16 W/12 V (@ 733 MHz)
Dimensions H x W
140 x 180 mm
RoHS compliant
-
ePanel-C3
ePanel-C3
ePanel-mgx
Features EPIC/CE EPIC/PM
CPU
Intel
®
LV/ULV Celeron
®
Intel
®
Pentium
®
M, Celeron
®
M
CPU Clock
400/733 MHz 600 MHz up to 1.8 GHz
Front Side Bus
100/133 MHz 400 MHz
Cache
L2: 256 kByte L2: up to 2 MByte
BIOS
Phoenix
®
Chipset
Intel
®
815 / ICH4 Intel
®
855GME / ICH4
DRAM
up to 512 MByte SDRAM up to 2 GByte DDR
DRAM socket
SDRAM-SODIMM DUAL DDR-RAM-SODIMM ECC
CompactFlash
Audio
5.1 Sound, Jack-plugs (Line In/Out/Mic)
Hard disk
EIDE (UMDA-133)
USB
6x USB 2.0 (4x ext, 2x int)
USB Boot/Legacy Support
I/O Standards
2x Ethernet, PS/2 mouse and keyboard, LPT DSUB, FDD 2x 1.44/2.88
I/O Features
21x GPIO 8x GPIO
Graphics Controller
Intel
®
Graphics engine Intel
®
Extreme Graphics 2
Graphics Memory
12 MByte VRAM up to 2x 32 MByte VRAM
Graphics
CRT & DVO & LCD (JILI-LVDS)
Serial Channels
4x (1x RS232 DSUB, 3x int. RS232 with 1x as RS422/485)
Common Features
Darkboot/Lanboot, Watchdog, System Monitoring
Special Features
fanless at 400 MHz for
enhanced reliability
DUAL Independent panel &
Enhanced SpeedStep
Power Management
APM 1.2 / ACPI 2.0
Cooling
400 MHz Passive / 733 MHz Active Active
Power connector
ATX or 5 V (option)
Dimensions H x W
115 x 165 mm
I/O Expansion Type
PC/104-Plus (ISA & PCI)
Operating Temperature
0 to 60°C
RoHS compliant
EPIC/PM
Intel
®
Pentium
®
M, Celeron
®
M
EPIC/PM
EPIC/CE
EPIC/CE
EPIC/CE
5.1 Sound
USB
LAN
CRT
COM
LPT
Kbd./Mouse
CompactFlash
new
32
33
ePanel
The SBC for mobile panel PCs
Do you need a low profile single board com-
puter to be mounted directly behind the
Flatpanel?
ePanel-mgx is a complete, ultra-low-profile
assembled PC with a maximum height of 7 mm,
based on SC1200
@
266 MHz CPU. A wide range
of software is available for this proven x86
platform. In addition to very low power con-
sumption (<7 W), this system also offers a
wide variety of interfaces, which makes it an
ideal embedded PC.
ePanel-C3 is the next stage in the develop-
ment of the unique Flatpanel-PC Concept in an
ultra-flat formfactor. It is based on VIA Eden
CPUs from 300 MHz up to 1 GHz and offers very
low power consumption and a wide variety of
interfaces. Further attractive features include
USB 2.0 support, 64 Mbyte graphics memory
and an MPEG2-hardware decoder for DVD appli-
cations. Supported Operating Systems:
Windows XP Embedded, Windows CE, LINUX.
Low profile
Low power consumption
MPEG2 hardware decoder (C3)
These boards work straight out of the box and
have instant availability and almost zero time to
market. All interfaces and most functionalities
are onboard and built in. Standard accessories
are likewise off-the-shelf and permit a fast
system setup. Other modules, on the other hand,
always need a fully customized backplane that
demands detailed R&D knowledge and engin-
eering time, so its time to market is longer and
R&D costs are higher. With an SBC like the
ePanel, systems can be designed within a short
period and built with little additional engin-
eering efforts.
EPIC
I/O Adapter video in/out
EPIC / ePanel
What happens when PC/104 falls in
love with a motherboard?
EPIC is born - with the best of
both worlds:
From fanless low power up to
Intel
®
Pentium
®
M.
With PC/104 ISA and PC/104-Plus PCI
extension for limitless I/O use.
Max. ATX alike featureset, max. cable
reduction - lead-free future provided for.
I/O Adapter standard
connectors
The EPIC family features
The following interfaces stay the same - throughout the whole EPIC FAMILY!