Filter
Top Products
Touch Panels, TFT Monitors
p. 80 f
Industrial Software, OPC drivers
p. 92 ff
64
65
With features like USB, Ethernet, RS232, DVI and external
watchdogs in combination with field buses like PROFIBUS-DP,
CANopen and DeviceNet, the ThinkIO offers an extraordinary
connectivity.
System IO
2 Digital Input and Output Channels each opto-isolated
2x USB 1.1 Ports
1x RS232 Serial Port
2x 10Base-T/100BASE-TX Fast Ethernet ports
1x DVI panel-link, TFT, VGA (with adapter)
External Watchdog
Run/Stop Switch
Reset Button
System Processor
Geode
™
SC1200 (266 MHz) and
integrated Chipset from AMD
Cache: 16 kByte 1st level
Memory
Bootable Onboard Flash Disk:
32/128 MByte
SDRAM: 32 MByte/128 MByte
RAM: 128 kByte, battery-buffered
External Compact Flash type I/II
Flexible Field Bus Selection:
PROFIBUS-DP Master/Slave
CANopen Master/Slave
DeviceNet Master/Slave
Dimensions: 160 x 70 x 95 mm
Available Software
PLC Programming System CoDeSys
with Target Visualization
Linux 2.4 GPL BSP
Windows CE 5.0 BSP
OPC Driver
SOPH.I.A.
Delivered Devices are ready to use
with pre-installed software.
The WAGO-I/O-SYSTEM 750 and 753 are the smallest
modularized, fieldbus independent, input/output sys-
tems for decentralized automation. They facilitate the
integration of cost and space saving I/O clamp nodes
using application specific, intermixable, digital, analog
and complex input/output modules.
The WAGO I/O System 753 offers all existing clamps
with the additional advantage that it separates
the clamps’ wire and function blocks
Fine Granularity: 1, 2, 4 or 8 channels in one
bus-module
Safe Investment: fieldbus independent node design
Special Functions: different voltages, output power,
and signals on one clamp
Furthermore, I/O clamps are available for Ex zone,
Profisafe, step motors, Dali bus, valves and others
Safe Operation: Certification for industrial auto-
mation, construction, shipboard automation and
on/off shore applications guarantees a wide range
of application possibilities (CE and GL approval)
ThinkIO and HMI
It is possible to connect Panels and Touchpanels
directly to the ThinkIO via the DVI and USB interfaces.
We suggest the 6.4" (640x480), 8.4" (640x480) and
10.4" (800x600) panels on page 81. The ready-to-use
configuration means that with our displays, commu-
nication between ThinkIO and the display can start
immediately.
For visualization of a process, the Target
Visualization is implemented in CoDeSys.
Long distances between ThinkIO and Touchpanel on
the machine can be solved by the Long Distance
Monitor System. Up to 40 m can be bridged with
this system (details see page 82).
CoDeSys Automation Alliance CAA
More than 60 companies belong to the CoDeSys
Automation Alliance. The aim of this association is
to achieve a standard within the IEC 61131-3, which
helps to harmonize programs used in automation on
independent hardware from different suppliers.
CoDeSys is a multi-function software tool for the
automation industry; it covers many typical tasks in
the field of plant and machine construction. CoDeSys
offers a range of open interfaces for external soft-
ware systems.
CoDeSys supports all five IEC 61131-3 languages
and on top offers a sixth editor, which is a variation
of the Function Block Diagram (FBD), called
Continuous Function Chart (CFC).
Integrated Target Visualization
Integrated Web Visualization
Integrated Modbus TCP/IP protocol
Field bus support and configuration for Profibus-DP,
CANopen and DeviceNet
Open Interfaces: OPC, HTTP, TCP/IP
Network variables by symbolic access via TCP or CAN
Tracing, logging, parameterizing watchdog properties
Offline simulation
The ThinkIO is the combination of a complete PC (Intel
®
Pen-
tium
®
MMX compatible 266 MHz processor) with the granular
WAGO-IO/-SYSTEM 750 and 753. The combination of the per-
fect connectivity and diversity of the Wago clamps with this
DIN Rail PC provides the opportunity to realize new ideas.
The optional IEC 61131-3 compliant PLC Programming System
CoDeSys provides the customer with an easy way to configure
the ThinkIO.
ThinkIO - I’ve got it all!
DIN Rail PC / ThinkIO