Filter
Top Products
FPC 5084 User Manual
Installation of Drivers
59
4.2 Touch Screen
The FPC 5084 uses the 5-wire analog resistve. There are the
specification and driver installation which are listed below.
4.2.1 Specification
Touch
S
cre
en
5-wire Analog Resistive type
Touch Screen
Controlle
r
PenMount 6000 USB
Touch Screen Controller IC
C
o
mm
unica
t
ions
USB interface
Baud Rate
19200 baud rate fixed
Res
olu
t
ion
1024 x 1024 (10 bit A/D converter inside)
Power
Input
5V
Power
Consumption
Active: 24.6mA / Idle Mode: 13.4mA
4.2.2 Driver Installation- Windows XP
The FPC 5084 provides a touch screen driver that users can install it
under the operating system Windows XP. To facilitate installation of
the touch screen driver, you should read the instructions in this chapter
carefully before you attempt installation.
1. Insert Driver CD and follow the path to select the
“\Drivers\XP\Step 5 - Touch”.
2. Follow the installing procedure and press OK.