Filter
Top Products
15
Hardware Installation Process
Step 3-5: PCI Expansion Card Installation
GS-SR168 provides expansion riser slot for one PCI-X 64/66MHz slot; and one with PCI-E
x8 slot. To install the peripheral, please go through the following steps.
Note!! Before installing the PCI expansion card, please check the card size limitation. Size limitation
for PCI-X height is 203.4 mm x 95 mm.
Step 1 Lift the riser bracket slightly, then pull it out from the server chassis.
Step 2 Align the expansion card with the guiding groove. Slide the expansion card into the slot until
the card firmly seats.
Step 3 Align the riser bracket to the system module (see the arrow direction mark 1), and push
it to locked position.
Step 4 Reverse Step 1 & 2 to lock the riser bracket firmly. Installation completed.
Step 1
Step 2
Step 3