Filter
Top Products
45
BIOS Setup
Halt On
The category determines whether the computer will stop if an error is detected during power up.
NO Errors The system boot will not stop for any error that may be detected
and you will be prompted.
All Errors Whenever the BIOS detects a non-fatal error the system will be
stopped.
Mid The system boot will not stop for a keyboard or disk error; it will
stop for all other errors. (Default value)
Memory RAS Feature Control
Select specified features for DIMMs. Sparing or Memory Mirroring.
Standard Select Standard as Memory RAS Feature. (Default value)
Sparing This feature allows user to uses a spare online bank to provide
DIMM fail-over capabilities when a pre-defined threshold of single-
bit correctable errors is reached.
Clear Mem. ECC Error Info
Enabled Enable Clear memory ECC error information function.
Disabled Disable this function. (Default value)