Filter
Top Products
DRIVERS INSTALLATION
IB935 User’s Manual 45
Drivers Installation
This section describes the installation procedures for software and
drivers under the Windows 98SE, Windows ME, Windows 2000 and
Windows XP. The software and drivers are included with the
motherboard. If you find the items missing, please contact the vendor
where you made the purchase. The contents of this section include the
following:
Intel Chipset Software Intallation Utility ................................... 46
Intel Graphics Driver Installation .............................................. 48
Realtek HD Code Audio Driver Installation .............................. 49
Intel PRO LAN Drivers Installation .......................................... 50
IDE Controller Driver Installation……………………………..52
IMPORTANT NOTE:
1. After installing your Windows operating system(Windows
98SE/ME/2000/XP), you must install first the Intel Chipset Software
Installation Utility before proceeding with the drivers installation.
2. How to create an AHCI driver disk, when your board supports the
RAID/AHC function:
1. Put an empty disc into your floppy disk drive
2. Execute the f6flpy32.exe that is in the Driver CD you have received.
The path is 8.1D\Intel\Q35\Raid\
3.When IDE Device (HDD, CDROM, etc.) is to be used, one must use a
USB-FDD device (with the IDE device driver floppy diskette inserted)
to install the drivers when Windows is initializing. When Windows is
starting, press F6 and follow the proceeding instructions. The IDE
device drivers can be found in the driver DVD disc that is provided with
the motherboard with location in E:\SCSI\ITE8211\DISK\ (assuming E:
is the DVD ROM drive).