3-13
BIOS Setup
Terminal Type
This setting specifies the terminal type (ANSI, VT100, VT-UTF8). This setting
must be identical on both the terminal and the server.
VT-UTF8 Combination Key Support
This setting allows you to enable/disable the VT-UTF8 combination key
support for ANSI/VT100 terminals.
Sredir Memory Display Delay
This setting allows you to select the delay before memory information is
displayed.
USB Configuration
Legacy USB Support
Select [Enabled] if you need to use a USB-interfaced device in the operating
system.
USB 2.0 Controller Mode
This setting allows you to select the USB 2.0 controller mode HiSpeed (480
Mbps) or Full Speed (12 Mbps).
BIOS EHCI Hand-Off
This setting allows you to enable/disable BIOS EHCI Hand-Off.
USB Beep Message
This setting allows you to enable/disable USB Beep Message.
USB Mass Storage Device Configuration
PDF created with pdfFactory Pro trial version www.pdffactory.com