Intel Intel Core Duo/Solo 945GM Computer Hardware User Manual


 
ADE-6050 Users Manual
24 / 48
3.3 Main Memory
The figures display the notch marks and what they should look like on your SO-DIMM
memory module.
SO-DIMM has 200-pins and two notches, that will match with the onboard SO-DIMM socket.
Memory modules are installed by placing the chip firmly into the socket at a parallel angle
and pressing straight down until it fits tightly into the SO-DIMM socket.
SO-DIMM Memory and 200-pins Socket
Memory Installation
NOTE: For maintaining system stability, do not change any of memory parameters in BIOS
setup to upgrade your system performance without acquiring technical information.
3.4 Installations
To install the board into standard chassis or proprietary environment, you need to perform
the following steps:
1. Check all jumpers setting on proper position
2. Install and configure CPU and memory module on right position
3. Place the board into the dedicated position in your system
4. Attach cables to existing peripheral devices and secure it