Filter
Top Products
14 Intel
®
InBusiness™ Internet Station
Connect the network cable
Attach a network cable to the RJ-45 connector of the Internet Station and your
10Mbps Ethernet hub. Use a Category 5 10Base-T cable for your connection.
Connect your modem or ISDN adapter
ØCaution: Make sure your Internet Station power is off before you connect or
disconnect modems.
Connect up to three modems to the Internet Station. The Internet Station only
supports the use of one ISDN adapter at a time.
Connect an external modem or ISDN adapter to the serial connector on the back
of the Internet Station and to a telephone line. If you use a PC card modem, slide
the card into a slot and seat it firmly. Make sure that the PC Card eject button is
fully extended. Use the connector supplied with the modem to connect the card to
a telephone line.
Connect the power cord
Connect the power supply to the Internet Station. Connect a power cord to the
power supply and to the power source. Press the Power button on the front panel
of the Internet Station. The Power button LED lights.
Organize your cables
Install the CableKeeper ring to keep your cables organized. Insert and rotate the
CableKeeper on the back panel of the Internet Station.
PC Card Slots 1 and 2 Reset button
Serial port
10Base-T port
Power port