Filter
Top Products
22 Intel
®
InBusiness™ Internet Station
IP address is not in this range, click Release and then click
Renew.
On Windows NT*:
Type the following from the command prompt:
ipconfig
The PC should have a network address of 192.168.42.n, where
n is from 1 to 127. If the IP address is not in this range, type the
following commands:
ipconfig /release
ipconfig /renew
• Make sure your browser is not set up to connect through a
proxy server. If it is, disable this setting:
In Internet Explorer:
Click Internet Options on the View menu, then click the
Connection tab and disable the “Access the Internet using a
proxy server” check box.
In Netscape Navigator:
Click Network Preferences on the Options menu, then click the
Proxies tab, and click No Proxies.
I cannot connect to the Internet
• Check the telephone line. If it is a regular analog line, connect a
telephone and see if you get a normal dial tone. Manually dial
your ISP number to see if you get a modem tone.
• Browse to the Internet Station home page. Click the Setup
Wizard button and verify that the telephone number and other
ISP settings are correct.
• Do you have to dial 9 first for an outside line?
• Review the Check alerts on the Internet Station Home Page.
Other Internet Station problems
I forgot my password
• If you set up your password security and forgot the password,
you must reset the Internet Station. This clears all of your
current configurations.
• Push the reset button on the back of the Internet Station, located
between the PC Card slots and the Serial port. Hold the button
in for 5 seconds.
• Your Internet Station resets to the original factory setup.