Filter
Top Products
4. Preparing to Run the Demo
13
The following is an example of a configuration file.
########################################################################################
# Telephony Protocol :
# For ANAPI(Analog Front End) use the root file name of the analog protocol file for
your country or telephone network)
# For ICAPI (Digital Front End) use the root file name of the country dependent
parameter <.cdp> file
# IP Protocol :
# The IP Protocol used for opening the IP Line devices, values: H323, SIP, both
#
# DTMFmode
# possible options:
# OutOfBand, inband, rfc2833
#
#
# Capability for audio codecs:
# g711Alaw
# g711Mulaw
# gsm
# gsmEFR
# g723_5_3k
# g723_6_3k
# g729a
# g729ab
#
# Capability for data codecs:
# t38
#
# Note: if you want to run the demo with coder g729 use:
# g729a for running with VAD disable
# and 729ab for running with VAD enable
#
# Caution:
# If capability is g711Alaw /Mulaw ==> FramesPerPkt = 10,20,30.
# G711 frame per packet defines the packet
size in milliseconds
# If capability is g723_5_3k / 6_3k ==> FramesPerPkt = 1, 2, 3 .
# FrameSize isn't needed, default= 30ms.
# If capability is gsm ==> FramesPerPkt = 1, 2, 3 .
# FrameSize isn't needed, default= 20ms.
# If capability is gsmEFR ==> FramesPerPkt = 1, 2, 3 .
# FrameSize isn't needed, default= 20ms.
# If capability is g729a ==> FramesPerPkt = 3, 4 .
# FrameSize isn't needed, default= 10ms.
# VAD disable, the VAD parameter is ignored
# If capability is g729ab ==>FramesPerPkt = 3, 4 .
# FrameSize isn't needed, default= 10ms.
# VAD enable, the VAD parameter is ignored
#
########################################################################################
ipProtocol = H323
Channel = 1-120
{
Source = NAME:Intel Corp.
Destination = 0.0.0.0
RemotePhoneNumber = 23
LocalPhoneNumber = 26
pstnProtocol = isdn