Filter
Top Products
BIOS SETUP
MB900-R User’s Manual 35
DRAM RAS# Precharge
This option sets the number of cycles required for the RAS to accumulate
its charge before the SDRAM refreshes. The default setting for the
Active to Precharge Delay is
4
.
Precharge Delay (tRAS)
The default setting for the Precharge Delay is
12
.
System Memory Frequency
The default setting is
533MHz
.
SLP_S4# Assertion Width
The default setting is
1 to 2 Sec
.
System BIOS Cacheable
The setting of Enabled allows caching of the system BIOS ROM at
F000h-FFFFFh, resulting in better system performance. However, if any
program writes to this memory area, a system error may result.
Video BIOS Cacheable
The Setting Enabled allows caching of the video BIOS ROM at
C0000h-F7FFFh, resulting in better video performance. However, if any
program writes to this memory area, a system error may result.
Memory Hole At 15M -16M
In order to improve performance, certain space in memory can be
reserved for ISA cards. This memory must be mapped into the memory
space below 16 MB. The choices are Enabled and Disabled.
On-Chip VGA Setting
The fields under the On-Chip VGA Setting and their default setti ngs are:
PEG/On Chip VGA Control: Auto
PEG Force x1: Disabled
On-Chip Frame Buffer Size: 8MB
DVMT Mode: DVMT
DVMT/Fixed Memory Size: 128MB
Onboard PCI-E LAN
By default, this setting is enabled.
Onchip ICH7 LAN
By default, this setting is enabled.