Filter
Top Products
GigMAC-PMC and PCI
GigPMC Switch Board and Driver Users Manual
DSS NETWORKS, INC. Version: 2.6 Page: 36
10.3 DRIVER UTILITY COMMAND REFERENCE
10.3.1 STATISTICS SHOW FUNCTION
vxWorks usage:
inShow(unit) # unit = device index starting from 0
Linux usage:
./dmUtil –s eth1 # eth1, eth2, etc.
Command output:
in: unit: 2, ioAddr: 0xe087c000, intNum: 0x30, checksum offload: 0, rev: 1.16m
link up: 1, full dup: 1, speed: 1000, tbiMode: 0
pci64: 1, pci66: 1, pci-x: 0
max frame size: 2048, numTxBds: 256, intrHoldOff: 1
interrupt cnt 369621 ints/sec 28880
task cnt 369895 timer cnt 311
data timeout cnt 311 unclaimed int cnt 0
mgmt int cnt 1 RX ERR INTR CNT 0
RX OVRN INT CNT 0 RX SEQ INT CNT 0
RX SHRT INT CNT 0 RX BUF ERRS 0
RX CKSUM ERRS 0 TX ERR INTR CNT 0
TX BUF ERRS 0 PCI ERR CNT 0
rx frame cnt 1051218 last rx queued 4
max rx queued 128 tx frame cnt 1051397
tx short segs 0 tx frame segs 1051397
tx cmpl cnt 1051227 last tx queued 244
max tx queued 244 last tx cmpl 5
max tx cmpl 244 max tx segs 1
max tx frm len 1500 tx cpy cnt 0
rx byte cnt 1576827000 tx byte cnt 1577095500
tot byte cnt 3153922500 tot frame cnt 2102615
tot bytes/sec 246072000 tot frames/sec 164048
rx alloc errs 0 tx alloc errs 0
seq num errs 0 bad len cnt 0
rx flow cnt 0 bad len size 0
tx flow on cnt 8866 tx flow off cnt 8865
tx empty cnt 0 rx err bits 00000000
rx extsts bits 00000000 tx err bits 00000000
init cnt 1 link down int cnt 0
phy reset cnt 0 link up int cnt 1
rx reset cnt 0 rx start cnt 1
sig det down cnt 0 auto neg start cnt 0
sig det up cnt 0 auto neg cmpl cnt 0
phy cfg cnt 1 phy addr 1
link fail state 0 failovr chk cnt 0
recover cnt 0 test int req cnt 0
test int rsp cnt 0 ints disabled cnt 6707
re-read ints 0 num priority queues 1
tx cleanup buf cnt 0 tx loop frames dropped 0
out of buffers 0 tx flow ctrld 1
rx flow ctrld 0 tmr state 2
data timeout 0 bad len val 0