Intel PCM-6896 Computer Hardware User Manual


 
Specifications
CPU: Intel FC-PGA 370-pin Pentium III and Celeron CPU’s (with system
bus frequencies of 66/100/133MHz)
CPU Socket: Intel socket 370
BIOS: Award 2MB Flash BIOS
Chipset: Intel 815E
I/O Chipset: ITE-8712. Fully 16-bit I/O decoded. Windond 83977EF as
2nd SIO for COM3, COM4 port.
ISA bus interface: Winbond W83626 LPC to ISA bridge.
Memory: Onboard One 168-pin DIMM socket supports up to 512
MBbytes SDRAM (PC 100/133 support)
Enhanced IDE: Supports two IDE devices. Supports Ultra DMA/100
mode with transfer rate up to 100MB/sec.
Connector: One 40-pin (2.54mm) pin header with box
FDD interface: Supports up to two floppy disk drives, 5.25” (360KB and
1.2 MB) and/or 3.5” (720KB, 1.44MB and 2.88MB)
Connector: One 34-pin (2.54mm) pin header with box
Parellel Port: One bi-directional parallel port. Supports SPP, ECP, and
EPP modes
Connector: One 26-pin (2.00mm) pin header
Serial Port: Three RS-232 serial ports, can be configured as COM1,
COM2, COM3, COM4, or disabled individually and one RS-232/422/
485(COM2). Either COM1, COM2 can be S/W configurable to support
Ring wake up function and COM3, COM4 provide the option to select12V/
Ring function by jumper setting (16C550 equivalent)
Connector: One 40-pin (2.54mm) pin header