Filter
Top Products
A standard conventional D-sub connector is equipped to interface
with conventional CRT displays. Refer to pin definitions as follows:
VGA Display Conncetor (CN14)
Pin Signal
1 RED
2 GREEN
3 BLUE
4 N/C
5 GND
6 GND
7 GND
8 GND
9 Vcc
10 GND
11 N/C
12 DDCSDA
13 H-SYNC
14 V-SYNC
15 DDCSCL
16 N/C
The PCM-6896 PCI SVGA interface can drive conventional CRT
displays and is capable of driving a wide range of flat panel
displays, including electroluminescent (EL), gas plasma, passive
LCD, and active LCD displays. The board has two connectors to
support these displays, one for standard CRT VGA monitors and
one for flat panel displays.
VGA Display Connector (CN14)