Intel PM915-478 Computer Hardware User Manual


 
10
If you enable this item, the system will also search for other boot
devices if it fails to find an operating system from the first two
locations.
Swap Floppy Drive Default:Disabled
If you have two diskette drives installed and you enable this item,
drive A becomes drive B and drive B becomes drive A.
Boot Up Floppy Seek Default:Enabled
Boot Up NumLock Status Default:On
Gate A20 Option Default:Normal
Typematic Rate Setting Default:Disabled
Typematic Rate(chars/sec) Default:6
Typematic Delay(Msec) Default:250
Security Option Default:Setup
ACPI Mode Default:Enabled
MPS Version Control For OS Default: 1.4
OS Select For DRAM > 64MB Default:Non-OS2
Report No FDD For WIN 95 Default:No
Full screen Logo show Default:Enabled
Small Logo (EPA) show Default:Enabled
5.4 Advanced Chipset Features
DRAM Timing Selectable Default: By SPD
X CAS Latency Time Default:Auto
X DRAM RAS# to CAS# Delay Default:Auto
X DRAM RAS# Precharge Default:Auto
X Precharge dealy (tRAS) Default: Auto
X System Memory Frequency Default:Auto
SLP-S4# Assertion Width Default:4 to 5 sec
System BIOS Cacheable Default:Enabled