Intel PM915-478 Computer Hardware User Manual


 
14
Wake-up by PCI card Default:Disabled
Power On by Ring Default: Disabled
Resume by Alarm Default:Disabled
Date (of Month) Alarm Default:0
Time (hh:mm:ss) Alarm Default:0
** Reload Global Timer Events **
Primary/ Secondary IDE 0/1 Default:Disabled
FDD,COM,LPT Port Default:Disabled
PCI PIRQ [A-D]# Default: Disabled
5.7 Set Supervisor Password &Set User Password
If you highlight this item and press Enter, a dialog box appears that
you can enter a supervisor password. You can enter no more than six
letters or numbers. Press Enter after you have typed in the password.
There will be the second dialog box asking you to retype the password
for confirmation. Press Enter after you have retyped it correctly. Then
the password is required for the access to the setup utility or for it
at start-up, depending on the setting of the password check item in
advanced setup.
5.8 Save Exit & Without Save Exit Setup
Highlight this item and press Enter to save the changes that you have
made in the setup utility configuration and exit the program. When the
save and exit dialog box appears, press Y to save and exit, or press
N to exit without saving.