Filter
Top Products
Intel® RAID Controller SASMF8I Hardware Guide 10
10. Watch the boot process until you see a BIOS message to inform you of the key
combination to press to enter the RAID BIOS Configuration Utility. It will look
similar to the following message:
Press <CTRL><E> to run BIOS Console 2.
This message will time out after several seconds and pass the option to get into the BIOS
Configuration Utility.
The firmware takes several seconds to initialize and will then display the RAID Controller
SASMF8I number and firmware version. The numbering of the controllers follows the
PCI slot scanning order used by the server board.