Filter
Top Products
Intel® RAID Controller SASMF8I Hardware Guide 16
Electrical Characteristics
This section provides the power requirements for the RAID Controller SASMF8I. Table 5
lists the maximum power requirements.
Thermal and Atmospheric Characteristics
The thermal and atmospheric characteristics are:
• Relative humidity range: 5% to 90% non-condensing
• Maximum dew point temperature: 32° C
• Airflow must be at least 200 linear feet per minute (SFPM) to avoid operating above
the maximum ambient temperature
The storage and transit environment conditions are:
• Temperature range from -30° C to 80° C (dry bulb).
• Relative humidity range: 5% to 90% non-condensing
Safety Characteristics
The RAID Controller SASMF8I meets or exceeds the requirements of UL flammability
rating 94 V0. Each bare board is also marked with the supplier name or trademark, type,
and UL flammability rating. For the boards installed in a PCI Express* bus slot, all
voltages are lower than the SELV 42.4 V limit.
The design and implementation minimizes electromagnetic emissions, susceptibility to
radio frequency energy, and the effects of electrostatic discharge. The adapter carries the
CE mark, C-tick mark, FCC self-certification logo, Canadian compliance statement,
Korean MIC, Taiwan BSMI, and Japan VCCI. The adapter meets the requirements of
CISPR Class B. Both the adapter is CCSA C22.2, No. 60950-1, UL60950-1 First Edition
listed accessory, UL filenumber E257743.
Table 5. Electrical Characteristics
PCI / PCI Express*
/ Express +12 V
PCI / +5.0 V
PCI / PCI
Express /
Express
+3.3 V
PCI PRSNT1# / 2#
Power
Operating
Range
Temperature
N/A N/A 1 A 3.2 W 0° C to 45° C