Filter
Top Products
Full-Size CPU Card SBC- 780
Chapter3 Award BIOS Setup
3 - 7
IDE Primary/Secondary Master/Slave
IDE HDD Auto-Detection
This section does not show information about other IDE
devices, such as a CD -ROM drive, or other hard drive types,
such as SCSI drives.
NOTE: It is recommended to select “AUTO” for all drives.
The BIOS can automatically detect the specific ations and
optimal operating mode of almost all IDE hard drives. When
you select AUTO for a hard drive, the BIOS will detect its
specifications
IDE Primary/Secondary Master/Slave
If you do not want to select "AUTO", other methods of
selecting the drive type are available:
1.NONE: No drive type to be selected.
2.Manual: This will allow you to manually set the drive type you
are using in your system. (See as below)
Drive A
Drive B
Select the correct specifications for the diskette drive(s) installed
in the computer.
None No diskette drive installed
360K, 5.25 in 5-1/4 inch PC-type standard drive; 360
kilobyte capacity
1.2M, 5.25 in 5-1/4 inch AT-type high-density drive;
1.2 megabyte capacity
720K, 3.5 in 3-1/2 inch double-sided drive; 720
kilobyte capacity
1.44M, 3.5 in 3-1/2 inch double-sided drive; 1.44
mega byte capacity
2.88M, 3.5 in 3-1/2 inch double-sided drive; 2.88