Intel SRCSATAWB Network Card User Manual


 
11 Intel® RAID Controller SRCSATAWB Hardware User’s Guide
Technical Specifications
Specification Intel
®
RAID Controller SRCSATAWB
Processor LSI* 1078 Integrated RAID on Chip 500 MHz
Operating foltage +3.3 V, +12 V
Card size Low profile, extended half-length (7.71-inch x 2.536-inch)
Array interface to host PCI Express* Rev 1.0A, x4 lane width 2.5 Gbps
SATA bus speed 3 Gbps per port, point-to-point
Serial port 3-pin RS232-compatible connector for debug use only
SATA controller LSI 1078
SATA ports 2x4 internal ports, 16 devices per port with expanders
Physical and virtual drive
support
16 drives per controller; 32 virtual drives per controller; 16 hot
spares per controller (global and/or dedicated)
Cache 128 MBs DDR2 667 MHz SDRAM, optional battery backup
Firmware 4 M in reflashable flash ROM
Compatible devices 2.5-inch and 3.5-inch SATA 3.0 drives; non disk devices
including expanders and drives of mixed capacity.
Cabling Small, thin cables do not restrict airflow; Shared connectors for
multiple drives
Redundant configuration 32 Kb NVRAM and config-on-disk (COD)
Enclosure management In-band and out-of-band SES2
Enclosure support Assumes one SEP per enclosure
Array support 128 arrays per controller; 16 drives per array; 16 virtual drives
per array.