Filter
Top Products
Default Tx Key (4): You can set up to four sets of WEP keys, and you
can decide which key is being used by default here.
If you don't know which one you should use, select
'Key 1'.
Encryption Key Input WEP key characters here. The number of
1 to 4 (5-8): characters must be the same as the number
displayed n the 'Key Format' field. You can use any
alphanumerical characters (0-9, a-z, and A-Z) if
you select 'ASCII' key format. If you select 'Hex' as
key the format, you can use characters 0-9, a-f, and
A-F. You must enter at least one encryption key here,
and if you entered multiple WEP keys, they should
not be same.
Enable 802.1x IEEE 802.1x is an authentication protocol. Every
Authentication (9): user must use a valid account to login to this
wireless router before accessing the wireless LAN.
The authentication is processed by a RADIUS server.
This mode authenticates the user by IEEE 802.1x,
but it does not encrypt the data during
communication. If there is a RADIUS server in your
environment, enable this function. Check this box
and another sub-menu will appear:
RADIUS Server Enter the IP address of the radius
IP address (11): server here.
RADIUS Server Enter the port number of the radius
Port (12): server here.
RADIUS Server Enter the port number of the radius
Password (13): password here.
11
12
13